Advertisement
Advertisement
Table of Contents
Related Manuals for Trailer Valet blackout Series
Summary of Contents for Trailer Valet blackout Series
- Page 1 JACKS OPERATING MANUAL...
-
Page 2: Table Of Contents
Failure to follow these guidelines may result in serious injury to persons and property for which Trailer Valet will not be held liable. Do not allow persons to operate or assemble this jack until they have read this manual and have developed a thorough understanding of how the jack works. - Page 3 13. The use of gloves is recommended while attaching the device to the trailer. 14. The Blackout Series Jack is only to be installed on trailer tongues that are rectangular in profile. Cylindrical tongues are not compatible with the jack as it will rotate, allowing the trailer to drop.
-
Page 4: Specifications
Specifications The Blackout Series Jacks is a line of manual hand-crank trailer jacks that have the versatility to be powered using any standard 18-24V drill and a Trailer Valet Drill Attachment. The line comes in two weight capacities with either side or center mount options. Each product comes standard with a hand crank, drill attachment, and static footplate. -
Page 5: Overview
Upon removing items from packaging, it is very important to thoroughly inspect all parts of the system before using the device. Any part that is missing or damaged must be immediately replaced. Contact Trailer Valet Customer Service at 1-844-846-9344 or Support@TrailerValet.com What’s in the Box:... -
Page 6: Assembly
assembly Prior to install, raise the trailer tongue until you have adequate space to attach the jack. The unit must be attached while the weight of the trailer is supported by an existing support or tow vehicle. Having wheel chocks in place during connection will insure a safe install. It is recommended that you make sure the jack will have necessary clearance from the ground to operate and rotate into the stow position. - Page 7 Bolt sizes are specific to your coupler and are in profile. Cylindrical frames are not compatible not included with your Blackout Series Jack with the mount bracket. purchase. Alternatively, the center jack can also be welded for a more permanent attachment to the trailer.
-
Page 8: Operating Instructions
Failure to lock in the pins and bolt prior to trailering with the unit in the stowed position may result in the unit becoming dislodged during movement. Visit our website to see a video on how to stow your Trailer Valet Jack. -
Page 9: Limited Manufacturer's Warranty
CUSTOMER RESPONSIBILITIES: Customers may be required to provide proof of purchase date, respond to questions designed to assist with diagnosing potential issues, and follow Trailer Valet’s directions to make a claim on your warranty. TO MAKE A WARRANTY CLAIM: Contact us either through: PHONE: (844) 846-9344 EMAIL: support@trailervalet.com... - Page 10 Copyright 2020 by Supertech S. Corporation. All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Supertech S. Corporation. For further information or if you have any questions, please contact: SUPERTECH S.
Need help?
Do you have a question about the blackout Series and is the answer not in the manual?
Questions and answers