Download Print this page

Mitsubishi Electric PUZ-HWM140HA Series Installation Manual page 6

Air to water heat pump
Hide thumbs Also See for PUZ-HWM140HA Series:

Advertisement

2. Installation location
en
4
Fig. 2-3
Fig. 2-4
Fig. 2-5
2.3. Ventilation and service space
2.3.1. Windy location installation
When installing the outdoor unit on a rooftop or other location unprotected from the
wind, situate the air outlet of the unit so that it is not directly exposed to strong winds.
Strong wind entering the air outlet may impede the normal airflow and a malfunction
may result.
The following shows three examples of precautions against strong winds.
1 Face the air outlet towards the nearest available wall about 35 cm away from the
wall. (Fig. 2-3)
2 Install an optional air protect guide if the unit is installed in a location where strong
winds from a typhoon, etc. may directly enter the air outlet. (Fig. 2-4)
A Air protect guide
3 Position the unit so that the air outlet blows perpendicularly to the seasonal wind
direction, if possible. (Fig. 2-5)
B Wind direction

Hide quick links:

Advertisement

loading