AAVIX A11705 Owner's Manual page 3

the cord for carrying, pulling or
unplugging the power tool. Keep cord
away from heat, oil, sharp edges or
moving parts. Damaged or entangled
cords increase the risk of electric shock.
5. When operating a power tool
outdoors, use an extension cord
suitable for outdoor use. Use of a cord
suitable for outdoor use reduces the
risk of electric shock.
6. If operating a power tool in a damp
location is unavoidable, use a ground
fault circuit interrupter (GFCI)
protected supply. Use of a GFCI
reduces the risk of electric shock.
7. The substitution of the plug or cable
should be done by a qualified
professional and repaired, if necessary,
before you operate it again. We
recommend that this product should be
connected to residual differential.
8. Do not touch the unit, cords,
switches, power source or plugs with
wet hands.
Personal Safety
1. Stay alert, watch what you are doing
and use common sense when
operating a power tool. Do not use a
power tool while you are tired or under
the influence of drugs, alcohol or
medication. A moment of inattention
while operating power tools may result
in serious personal injury.
2. This product is dangerous in the
hands of untrained users.
3. Use personal protective equipment.
Always wear eye protection. Protective
equipment such as dust mask, non-skid
safety shoes, hard hat, or hearing
protection used for appropriate
conditions will reduce personal injuries.
4. Avoid accidental starting. Ensure the
switch is in the off-position before
plugging in. Carrying power tools with
your finger on the switch or plugging in
power tools that have the switch on
invites accidents.
5. Remove any adjusting key or
wrench from a rotating part before
turning the power tool on. A wrench
or a key left attached to a rotating part
of the power tool may result in
personal injury.
6. Do not overreach. Keep proper
footing and balance at all times. This
enables better control of the power
tool in unexpected situations.
7. Dress properly. Do not wear loose
clothing or jewellery. Keep your hair,
clothing and gloves away from moving
parts. Loose clothes,jewellery, or long
hair can be caught in moving parts.
WARNING:
safety warnings and all instructions.
Failure to follow the warnings and
instructions may result in electric
shock, fire, and/or serious injury.
Power Tool Use And Care
1. Do not force the power tool. Use the
correct power tool for your application.
The correct power tool will do the job
better and safer at the rate for which it
was designed.
2. Do not use the power tool if the
switch does not turn it on and off. Any
power tool that cannot be controlled
with the switch is dangerous and must
be repaired.
3. Disconnect the plug from the power
source from the power tool before
making any adjustments, changing
Read all
3