Table of Contents
Advertisement
Message explanations
Corrective
Reduce size of configuration, split on more RCU's or change to RCU with more
actions:
memory.
RBUS: RIO configuration check disabled
Description:
Given when either a redundant master is set in configuration mode, or a
redundant slave is booted with initial redundancy update disabled.
Possible
The configuration CRC is discarded and the IO input will be read and accepted.
consequences:
Corrective
Alarm is cleared by backup/reboot.
actions:
RBUS: RIO module set in Maintenance mode. (See code in
separate column)
Description:
When reading or writing backup, the systems checks for inconsistency between
the RIO modules configured in and what is physically connected. This alarm
indicates a conflict.
Possible
The actual RIO module(s) with conflict will not be operational.
consequences:
Corrective
A separate alarm view column will show the reason for the Maintenace mode:
actions:
RBUS MSG xxx: An unexpected status from an RBUS message is received. Note
column text and operational information. Contact customer support.
RIO FW: FW version is too old to support expected functionality. Upgrade to
required FW version.
RIO CFG: The RIO module FW did not accept the received configuration. Note
message text and operational information. Contact customer support.
RBUS: Unknown error index (See code in separate column or
message)
Description:
An error with index not defined in the RBUS driver text pool is being reported,
possibly due to a version conflict between RBUS driver, AK and/or RIO module
FW.
Possible
There is no immediate way to find a correct description of the error.
consequences:
Corrective
Note error data and operational information. Contact customer support.
actions:
RBUS: Unrecognized error: %d
Description:
An error with index not defined in the RBUS driver text pool is being reported,
possibly due to a version conflict between RBUS driver, AK and/or RIO module
A-50
385585/C
Advertisement
Table of Contents
