PRESONUS revelator Owner's Manual page 61

7 Studio One Artist Quick Start Guide
7.3 Creating a New Song
2. Click on the Audio I/O Setup tab.
3. From the Inputs tab, you can enable the inputs for your Revelator, including
the Loopback Inputs. that you'd like to have available. We recommend
you create a mono input using Input 1 of your Revelator and two Stereo
Inputs; one for Loopback Streams 3-4 and another for Loopback Streams
5-6. These correspond to Loopback 1 and Loopback 2 respectively.
4. Click on the Outputs tabs to enable any or all of the outputs on
your Revelator. In the lower right corner, you will see the Audition
Select menu. This allows you to choose the output from which you
will audition audio files prior to importing them into Studio One
Artist. In general, you will want this to be the main output bus.
Power User Tip: If you would like this I/O configuration to be the same every time
you open Studio One, click the Make Default button.
Revelator
Owner's Manual
58