Table of Contents
Advertisement
Quick Links
INSTRUCTIONS FOR INSTALLATION, SAFE OPERATION AND MAINTENANCE
Understand manual before use. Operation of this device without understanding the manual and
WARNING
receiving proper training is a misuse of this equipment. Obtain safety information at tft.com/
serialnumber.
This equipment is intended for use by trained and qualifi ed emergency services personnel for
fi refi ghting. All personnel using this equipment shall have completed a course of education
approved by the Authority Having Jurisdiction (AHJ).
This instruction manual is intended to familiarize fi refi ghters and maintenance personnel with the
operation, servicing, and safety procedures associated with this product. This manual should be
kept available to all operating and maintenance personnel.
ThunderFog Series
TASK FORCE TIPS LLC
MADE IN USA • tft.com
©Copyright Task Force Tips LLC 2002 - 2020
MANUAL: ThunderFog, QuadraFog
QuadraFog Series
3701 Innovation Way, Valparaiso, IN 46383-9327 USA
800-348-2686 • 219-462-6161 • Fax 219-464-7155
and QuadraCup
QuadraCup Series
LKF-100 January 22, 2020 Rev20
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Task Force Tips ThunderFog Series
Summary of Contents for Task Force Tips ThunderFog Series
- Page 1 ThunderFog Series QuadraFog Series QuadraCup Series TASK FORCE TIPS LLC 3701 Innovation Way, Valparaiso, IN 46383-9327 USA 800-348-2686 • 219-462-6161 • Fax 219-464-7155 MADE IN USA • tft.com ©Copyright Task Force Tips LLC 2002 - 2020 LKF-100 January 22, 2020 Rev20...
- Page 2 6. Failure to follow these guidelines may result in death, burns or other severe injury. Fire and Emergency Manufacturers and Service Association FEMSA P.O. Box 147, Lynnfi eld, MA 01940 • www.FEMSA.org ©Copyright Task Force Tips LLC 2002 - 2020 LKF-100 January 22, 2020 Rev20...
-
Page 3: Table Of Contents
10.2 1.5” QUADRAFOG AND QUADRACUP SERIES 10.3 1.5” & 2.5” THUNDERFOG SERIES 11.0 WARRANTY 12.0 MAINTENANCE 12.1 FIELD LUBRICATION 12.2 SERVICE TESTING 12.3 REPAIR 13.0 OPERATION AND INSPECTION CHECKLIST ©Copyright Task Force Tips LLC 2002 - 2020 LKF-100 January 22, 2020 Rev20... -
Page 4: Meaning Of Safety Signal Words
Make sure the nozzle is securely attached and pointing in a safe direction before water is turned on. Do not direct water stream to cause injury or damage to persons or property. ©Copyright Task Force Tips LLC 2002 - 2020 LKF-100 January 22, 2020 Rev20... -
Page 5: General Information
ThunderFog, QuadraFog, and QuadraCup nozzles are available in several models. Table 3.1 Shaper Coupling Ball Valve Handle Model Number Serial Number Operating Pressure A) TIP ONLY B) BALL VALVE Figure 3.1A Figure 3.1B ©Copyright Task Force Tips LLC 2002 - 2020 LKF-100 January 22, 2020 Rev20... -
Page 6: Specifications
-40 to 65° C Materials used Aluminum 6000 series hard anodized MIL 8625 class 3 type 2, stainless steel 300 series, nylon 6-6, nitrile rubber Table 3.2.1 ©Copyright Task Force Tips LLC 2002 - 2020 LKF-100 January 22, 2020 Rev20... -
Page 7: Nozzle Couplings
5-40 GPM QUADRAFOG and QUADRACUP FLOW (GPM) FLOW (GPM) FLOW (LPM) FLOW (LPM) 1000 1000 100 PSI 100 PSI 95-250 GPM THUNDERFOG 30-200 GPM THUNDERFOG FLOW (GPM) FLOW (GPM) ©Copyright Task Force Tips LLC 2002 - 2020 LKF-100 January 22, 2020 Rev20... - Page 8 5-40 GPM QUADRAFOG FLOW (GPM) FLOW (LPM) 75 PSI 30-125 GPM QUADRAFOG and QUADRACUP FLOW (GPM) FLOW (LPM) 1000 75 PSI 30-200 GPM THUNDERFOG FLOW (GPM) Figure 4.0 ©Copyright Task Force Tips LLC 2002 - 2020 LKF-100 January 22, 2020 Rev20...
-
Page 9: Nozzle Controls
If an immediate wide protective fog pattern is needed, the sleeve can be retracted instantly to its regular position. ©Copyright Task Force Tips LLC 2002 - 2020 LKF-100 January 22, 2020 Rev20... -
Page 10: Use With Foam
DL = Device loss in PSI EL = Elevation loss in PSI 8.0 APPROVALS Many nozzle confi gurations carry the FM Approval rating, NFPA certifi cation, and/or EN certifi cation. ©Copyright Task Force Tips LLC 2002 - 2020 LKF-100 January 22, 2020 Rev20... -
Page 11: Color Coded Handle Cover And Pistol Grips
White • Purple Preconnect or discharge #5 Blue • Tan Preconnect or discharge #6 Black Preconnect or discharge #7 Green Foam Lines Red w/ White border (Red/White) ©Copyright Task Force Tips LLC 2002 - 2020 LKF-100 January 22, 2020 Rev20... -
Page 12: Drawings And Part Lists
10.0 DRAWINGS AND PART LISTS 10.1 1” QUADRAFOG SERIES DQ40, DQS40 & DQS40P ©Copyright Task Force Tips LLC 2002 - 2020 LKF-100 January 22, 2020 Rev20... - Page 13 FLAT WASHER VM4901 STOP PIN D07550 6 X 1/4 SS DRIVE SCREW VT06D00DS250 * - CONSULT FACTORY FOR SPECIFIC PART NUMBERS ** - STATE DESIRED THREAD WHEN ORDERING ©Copyright Task Force Tips LLC 2002 - 2020 LKF-100 January 22, 2020 Rev20...
-
Page 14: Quadrafog And Quadracup Series
8-32 X 1/8" SET SCREW VT08-32SS125 1/8" ACETAL BALL VB125AC O-RING VO-127 * - CONSULT FACTORY FOR SPECIFIC PART NUMBERS ** - STATE DESIRED THREAD WHEN ORDERING ©Copyright Task Force Tips LLC 2002 - 2020 LKF-100 January 22, 2020 Rev20... - Page 15 PATTERN LABEL QUADRACUP FL205 FOAM HEAD FT226 6 X 1/4 SS DRIVE SCREW VT06E00DS250 * - CONSULT FACTORY FOR SPECIFIC PART NUMBERS ** - STATE DESIRED THREAD WHEN ORDERING ©Copyright Task Force Tips LLC 2002 - 2020 LKF-100 January 22, 2020 Rev20...
-
Page 16: 2.5" Thunderfog Series
7/16-20 X 7/32 HOLLOW LOCK SET VT43-20HL218 SCREW DEFLECTOR JT210 BUMPER JT270 FIXED HEAD JT220 JT260 V FOLLOWER JT263 PATTERN LABEL JL200* OD WEAR RING JT267 SPINNING TEETH BUMPER JT265 ©Copyright Task Force Tips LLC 2002 - 2020 LKF-100 January 22, 2020 Rev20... - Page 17 VO-032 52** 140 COUPLING 2.5" J14097** GASKET - 2.5" V3190 O-RING-033 VO-033 * - CONSULT FACTORY FOR SPECIFIC PART NUMBERS ** - STATE DESIRED THREAD WHEN ORDERING ©Copyright Task Force Tips LLC 2002 - 2020 LKF-100 January 22, 2020 Rev20...
-
Page 18: Warranty
11.0 WARRANTY Task Force Tips LLC, 3701 Innovation Way, Valparaiso, Indiana 46383-9327 USA (“TFT”) warrants to the original purchaser of its products (“equipment”), and to anyone to whom it is transferred, that the equipment shall be free from defects in material and workmanship during the fi... -
Page 19: Maintenance
12.1 FIELD LUBRICATION All Task Force Tips nozzles are factory lubricated with high quality silicone grease. This lubricant has excellent wash out resistance, providing long term performance in fi refi ghting nozzles. If your department has unusually hard or sandy water, the moving parts of the nozzle may be aff... -
Page 20: Operation And Inspection Checklist
TASK FORCE TIPS LLC 3701 Innovation Way, Valparaiso, IN 46383-9327 USA 800-348-2686 • 219-462-6161 • Fax 219-464-7155 MADE IN USA • tft.com ©Copyright Task Force Tips LLC 2002 - 2020 LKF-100 January 22, 2020 Rev20...
Need help?
Do you have a question about the ThunderFog Series and is the answer not in the manual?
Questions and answers