Advertisement
Regular TV or Cable TV Without Set-top Box
(Single-tuner)
For this setup, you will use the ports on the back of the Adaptec
AVC-3610. You will need:
One RF coaxial cable
One USB cable
Note: All required cables are included in the kit. See
help identifying the cables.
To connect the Adaptec AVC-3610:
1 Connect the USB cable from the USB port on the Adaptec
AVC-3610 to a USB 2.0 port on your computer.
Back of AVC-3610
2 Connect the RF coaxial cable from the TV1 j
to
AVC-3610
3 Continue with
USB Cable
RF Coaxial Cable
TV wall jack or antenna.
your
Completing the Setup on page
ack on the
12
page 9
25.
for
Advertisement
