Liquiflo FTS Transfer Pump User Manual
Series Nos. FTS150 and FTS200
Vanes and springs replacement
Drain gear chamber – Figure 1
1. Turn pump over and remove bottom
drain plug (Part# 20-13000 Hex socket
drain plug ¾" NPT) from gear chamber,
Figure 2
2. Drain the gear oil from the gear
chamber, Figure 3
3. Remove the top drain plug (Part# 20-
13000 Hex socket drain plug ¾" NPT)
from the gear chamber, Figure 4
Remove bottom drain plug
Figure 2
Remove gear chamber from
center plate and pump chamber
1.
Remove the eight socket head cap
screws (Part# 20-00206-GII SHCS
6mm x 1mm x 40mm) that attach
the gear chamber and center plate
to the pump housing, Figure 5.
2.
Carefully pull the gear chamber to
remove it from the center plate.
3.
If the gear chamber sticks to the
center plate, find the pry slot on the
center plate, Figure 6, and insert a
flat head screwdriver to gently
loosen the gear chamber from the
center plate.
5
Maintenance and service
Figure 1
Drain gear oil
Figure 3
Remove screws
Figure 5
Top and bottom
drain plug locations
Remove top drain plug
Figure 4
Remove gear chamber
Figure 6
21