Adjusting The Seat - Yo-Yo Desk BIKE Assembly Manual

Page 8/13
OPERATION GUIDE
MAGNETIC RESISTANCE ADJUSTMENT
The resistance control knob allows you to adjust the resistance level in increments from 1 to 8, with
level 8 offering the most resistance. To increase the resistance level, turn the resistance control
knob in the (+) direction. To reduce the resistance level, turn the knob in the (-) direction.

ADJUSTING THE SEAT

Proper seat adjustment is essential to a comfortable ride when using the desk bike. If your leg is
too straight or your foot cannot touch the pedal, you will need to move the seat down. If your leg is
bent too much, you will need to move the seat up. Press the seat lever located directly below the
seat to move the seat either up or down. As a saddle height guide, your feet should just touch the
ground when you are sitting.
Seat handle bar
Seat lever
Seat
Pic ①
sales@yo-yodesk.co.uk +44 (0)1793 575 082