Table of Contents
Advertisement
You need only connect the projector to a video source device using just one of the connecting methods,
however each provides a different level of video quality.
HDMI
Component Video (through RGB
input)
S-Video
Video
Connecting audio
The projector has built-in mono speaker(s) which are designed to provide basic audio functionality
accompanying data presentations for business purposes only. They are not designed for, nor intended
for stereo audio reproduction use as might be expected in home theater or home cinema applications.
Any stereo audio input (if provided), is mixed into a common mono audio output through the projector
speaker(s).
The built-in speaker(s) will be muted when the AUDIO OUT jack is connected.
• The projector is only capable of playing mixed mono audio, even if a stereo audio input is connected.
• If the selected video image is not displayed after the projector is turned on and the correct video source has been
selected, check that the video source device is turned on and operating correctly. Also check that the signal cables
have been connected correctly.
Connecting InstaShow (WDC10)
• Connect the HDMI cable to the HDMI out jack of the InstaShow Host and the HDMI input jack of the
projector.
• Connect one end of the supplied USB cable to the mini USB jack of the InstaShow Host and the other
end to the USB type A jack (1.5A) of the projector.
20
Connection
Terminal
Picture quality
Best
Better
Good
Normal
Advertisement
Table of Contents
