Step 7 - Verify Installation & Leds - Dolphin MXH94 Series User Manual

TIP: Dolphin provides software and documentation for several product families; please remember to select the MX product family
before downloading. The adapter card requires Dolphin software version DIS 5.18.0 or higher to operate.
The software download requires a password to log in. The password will automatically be emailed to you if you follow the
instructions found on the getting started document bundled with the adapter card. If you fail to provide the correct serial number
found on the getting started document, your request will be managed manually.
Step 7 – Verify Installation & LEDs
The adapter card comes with 4 bi-color LEDs which show the corresponding cable port status according to Table 1: LED below.
The LEDs are visible through cut-outs in the PCIe bracket on each side of the cable connector block.
MXH94x / MXH95x NTB Adapter User's Guide – Dolphin Interconnect Solutions
LED color
Off
Yellow
Green
Table 1: LED behavior
Function
No cable installed
Cable installed, no link
Cable installed, link operational
Page 9