Eeprom And Firmware Upgrade; Identifying The Card - Dolphin MXH94 Series User Manual

Hide thumbs Also See for MXH94 Series:
Table of Contents

Advertisement

EEPROM and Firmware Upgrade

Dolphin may from time to time publish updated firmware for the Board Management Controller, PCIe switch or EEPROM data for
the card. Please contact Dolphin for instructions on how to upgrade the adapter card
WARNING: Please note that standard Microsemi tools (ChipLink) cannot be used to upgrade the firmware as this will violate the
warranty. Please contact Dolphin for instructions on how to upgrade the adapter card firmware.
Note: Please consult the adapter card firmware release note for details on supported configurations.

Identifying the Card

The card has a label-sticker with the serial number in the format 'MXH940-YY-ZZZZZZ', where YY denotes the card revision (e.g. CC)
and ZZZZZZ denotes the serialized production number (e.g. 012345) – this whole string makes up the serial number of the card (i.e.
MXH940-CC-012345).
You can also get this information using lspci in Linux:
First, identify the devices for the Dolphin Host card:
# lspci | grep "Device 4052"
09:00.0 PCI bridge: PMC-Sierra Inc. Device 4052
09:00.1 Bridge: PMC-Sierra Inc. Device 4052
0a:00.0 PCI bridge: PMC-Sierra Inc. Device 4052
Then run lspci and identify the card. It will show up as something like
# # lspci -s 9:0.0 -v
09:00.0 PCI bridge: PMC-Sierra Inc. Device 4052 (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin ? routed to IRQ 34
Bus: primary=09, secondary=0a, subordinate=0b, sec-latency=0
I/O behind bridge: 00001000-00001fff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [7f8 v1] Vendor Specific Information: ID=ffff Rev=1 Len=808 <?>
Kernel driver in use: pcieport
\ Deleted lines ...
To identify the serial number, do
MXH94x / MXH95x NTB Adapter User's Guide – Dolphin Interconnect Solutions
Page 12

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents