Page 1
Measuring Computer BOATRONIC MS / BOATRONIC MS-420 Quick-reference Instructions for Measuring This document does not substitute for reading operating manual 7134.8!
Page 2
1.3 BOATRONIC MS/MS-420 NOTE For optimum measurement results with the highest possible degree of accuracy the operating software must be up to date. To this end, KSB regularly provides the latest software for updating the BOATRONIC MS/MS-420 operating software at the following link: http://shop.ksb.com/catalog/de/de/product/ES000464...
Page 3
2 Zero Point Calibration 2 Zero Point Calibration Manual zero point calibration is recommended for a more accurate measurement. The valve must be closed for this purpose. The measuring computer can only calibrate when the fluid is stationary. The nominal size and the fluid including concentration must be entered.
Page 4
3 Taking Measurements 3 Taking Measurements ü Power supply must be provided. For BOATRONIC MS, insert four AA Mignon batteries (1.5 V); for BOATRONIC MS-420, apply 24 V DC. ü The connection between the measuring computer and the ultrasonic transducer must be established. 1. Briefly press the key.
Need help?
Do you have a question about the BOATRONIC MS and is the answer not in the manual?
Questions and answers