Table of Contents
Advertisement
Link Speed
When select Link Speed, the link speed information will show up on the right side of every white box
(port).
Display format
[PCIe generation] x[PCIe lanes].
e.g.
Nvidia A100 PCIe is a PCIe Gen4 x16lane device, under normal condition, the link speed should
be displayed as Gen4 x16
1. Current link speed:
2. Maximum link speed:
Note:
Max link speed should always be Gen4 x16, the current link speed is depending on the device
installed.
Error
When select Error, the PCIe error count will show up on the right side of every white box (port).
Display format
[Bad DLLP] – [Bad TLP] – [Port RX Error] – [Recovery Diag. Error]
e.g.
0-0-0-2 indicates that there are two Recovery Diag. Error count.
1. Error counts:
2. Clear errors:
The current link speed of the device installed on the PCIe port.
The maximum link speed of the PCIe port
displays the number of each error type.
Click the icon to reset all error counts. (back to 0-0-0-0)
19
Advertisement
Table of Contents
