Setup, Commissioning And Maintenance; Safety Of Machinery - Emerson Epsilon Eb-202 Installation Manual

Epsilon Eb Digital Servo Drive Installation Manual
is designed for use in an environment classified as pollution
degree 2 in accordance with IEC664-1. This means that only
dry, non-conducting contamination is acceptable.

Setup, Commissioning and Maintenance

It is essential that you give careful consideration to changes to
drive settings. Depending on the application, a change could
have an impact on safety. You must take appropriate
precautions against inadvertent changes or tampering.
Restoring default parameters in certain applications may
cause unpredictable or hazardous operation.

Safety of Machinery

Within the European Union all machinery in which this
product is used must comply with Directive 89/392/EEC, Safety
of Machinery.
The product has been designed and tested to a high standard,
and failures are very unlikely. However the level of integrity
offered by the product's control function – for example stop/
start, forward/reverse and maximum speed – is not sufficient
for use in safety-critical applications without additional
independent channels of protection. All applications where
malfunction could cause injury or loss of life must be subject to
a risk assessment, and further protection provided where
needed.
Warning
General warning
Failure to follow safe installation guidelines can cause death or
serious injury. The voltages used in this unit can cause severe
electric shock and/or burns, and could be lethal. Extreme care is
necessary at all times when working with or adjacent to this
equipment. The installation must comply with all relevant safety
legislation in the country of use.
8
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com