Advertisement
VC720512MUK Rev1.qxp_Instruction Book 15/04/2020 10:40 Page 6
Using in upright steam cleaning mode
IMPORTANT: Before use, hardfloors should be thoroughly swept and carpets should be thoroughly dry
vacuumed. However, we recommend that the steam cleaner is not used on:
bare wooden floors or any surfaces where wood is exposed (as it will absorb moisture and may distort).
•
damaged hardfloors or hardfloors with gaps present (as it will absorb moisture and may distort).
•
Also, do not keep the steam cleaner in one place for an extended period, because the continual heat may
cause damage to carpets and laminate flooring.
Please disconnect and allow the unit to cool before changing cloths and attachments.
Remove the handheld steam cleaner
main body
(7)
by pressing the handheld release
button (3). Open the filler cap
Fill the water tank
filling jug (21).
IMPORTANT: To prevent limescale build-up in the
water tank, never fill the steam cleaner's tank
with anything other than deionised,
demineralised or distilled water (available from
most leading supermarkets). Any problems
arising from limescale will invalidate the product
guarantee.
Close the filler cap. Reposition the handheld steam
cleaner back into the main body (see points B and
C of 'Upright Steam Cleaning: Assembly').
Rotate the upper cord storage hook
quickly release the power cord (4).
6
(8)
from the
(14)
by lifting the tab.
(11)
using the funnel
(20)
and
(5)
to
1
Attach the micro-fibre floor cloth
floorhead (17), securing it in place using the
hook and loop fastener pads.
WARNING: Before switching ON, ensure the
floorhead
(17)
is located safely away from
persons or animals.
Plug in at the mains outlet and switch on the
steam cleaner by rotating the steam dial
your desired setting. The power indicator light
will illuminate green and steam will be emitted
after around 40 seconds.
2
(18)
to the
4
(9)
to
(10)
Advertisement
