Morphy Richards Garment Steam Brush User Manual

RN42615MUK Rev4_Instruction Book 23/04/2013 09:52 Page 1
ACCESSORIES &
ATTACHMENTS
Follow the instructions on
steam ironing and select the
appropriate accessory.
Lint & bristle
brushes
The lint brush  is designed
for use on clothes, ties and
fabrics C.
C
The bristle brush Ê should be
used on curtains and sofas D.
D
WARNING: Before
assembling or disassembling
the attachment brushes,
unplug the Garment Steam
Brush from the electrical
socket and allow it to cool
down completely.
Assembly
1 Select the desired brush
attachment according to your
requirements.
2 Assemble the front of the brush
attachment onto the Garment
Steam Brush E.
E
3
Press down the attachment
and the attachment locking
¤
lever will lock it in place
UK Helpline 0844 871 0960
5
F
Disassembly
1
Push the attachment locking
G
lever outwards .
G
2
Remove the attachment in an
H
upwards motion
H
Cleaning brush
Use the cleaning brush Á to
maintain the lint brush and
bristle brush by removing dust
and fibres after use.
Rest stand
During use, rest your Garment
Steam Brush in the
rest stand Í I.
I
MAINTENANCE
IMPORTANT: Do not descale
the soleplate with descaling
products, proprietary
F
. cleaning agents or vinegar
when flushing out the
soleplate.
Replacement Parts 0844 873 0726
www.morphyrichards.com
To clean a coated
soleplate
In the unlikely event of any
man-made fibre fusing to the
soleplate ⁄, set the Garment
Steam Brush at the 3-dot
position and pass it over a
clean piece of cotton. This will
draw the deposit off the
surface.
Do not use scouring powder or
solution as this could cause
damage to the coating.
To clean the
exterior
Allow the Garment Steam
Brush to cool and wipe over
with a damp cloth and mild
. detergent, then wipe with a dry
cloth.
EMPTYING &
STORING
When you have finished ironing
or steaming, unplug
your Garment Steam Brush.
Ensure that the temperature
control dial is set at the 'MIN'
position B, lift up the filler cap
and empty any remaining water
out of the filling hole J.
J
Rest the Garment Steam Brush
on its rest stand Í to allow it
to cool completely I.
Do not store the Garment
Steam Brush in the box, but in
the storage bag Ë supplied.
IMPORTANT: The flex can be
damaged if wound too tightly
for storage. Make a loose loop
with the flex. The Garment
Steam Brush must be cool
before winding the flex and
storing.
Ireland Helpline 1800 409 119