Advertisement
Components, parts and materials containing
refractory ceramic fibers
Components, parts and materials containing
radioactive substances
2.0 Tools Required
List the type and size of the tools that would typically be used to disassemble the product to a point where components
and materials requiring selective treatment can be removed.
Tool Description
Torx driver
Philiphead screw driver
Plier
Description #4
Description #5
3.0 Product Disassembly Process
3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment:
1.
Remove cover by removing the screws securing the cover onto the chassis.
2.
Remove antenna PCA by removing the 5 screws securing the internal antenna.
3.
Disconnect the 6 cables connecting antenna PCA to the main PCA.
4.
Remove the 2 radio card by removing the 2 screws on each radio card.
5.
Remove the main PCA by removing the standoff on the center and 4 screws at the edge of the main PCA.
6.
7.
8.
3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items
contained in the product that require selective treatment (with descriptions and arrows identifying locations).
EL-MF877-00
Template Revision B
PSG instructions for this template are available at
EL-MF877-01
0
0
Tool Size (if
applicable)
T-10
-
-
Page 2
Advertisement
