Electrolux WELL A5 Series Instruction Book page 10

Hide thumbs Also See for WELL A5 Series:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
on the product UI gets illuminated.
9. For best results, operate the unit in an enclosed area with doors & windows
closed when feasible.
FIRST & ONGOING USE – picture pages 6-7
TURNING ON
10. Tap the POWER button
NOTE: At every new run, it will take about 10 seconds for the sensors to calibrate and analyze the air quality before
ramping up to the appropriate fan speed. During this time, the air quality indicator will pulsate slowly in white.
CHANGING MODES & FAN SPEEDS
11. Tap the MODE button
MANUAL
SMART: This is the default mode the unit will start in. In the SMART mode the
unit will utilize the sensor data as input to decide on the appropriate fan speed
and the UI display's type & intensity level. The fan speed cannot be adjusted
manually by the user under this mode. Please see the AIR QUALITY INDICATOR
section for more details.
NOTE: The AQI light will turn off completely in a dark room when the unit is in smart mode, so as not to disturb.
MANUAL: In the MANUAL mode the unit will utilize the sensor data as input only
to show the air quality level via the air quality indicator but will not self-adjust
the fan speed. This mode is best utilized for a quick burst of cleaning, especially
when the user anticipates an increase in particulate matter in the room due to
household chores (e.g. vacuuming).
12. While in MANUAL mode, tap and scroll on the fan speed slider to adjust the speed
of cleaning – left most side being the lowest and right most side being the highest
speed.
NOTE: The unit will ramp up OR down to chosen speed setting gradually. The slider also acts as the indicator for the
current fan speed.
13. STANDBY & WiFi OFF: The air purifier is designed with ECODESIGN principles in
mind and hence will aim to limit power consumption to under 2.0W when unit is
powered OFF (unless user permission to override). When unit is powered ON, if
it has no WiFi connectivity OR is not onboarded, the WiFi radio signal will
automatically turn OFF after 30 minutes to conserve power – to bring the WiFi
www.electrolux.com
once to turn ON the air purifier
once to toggle between the two modes: SMART and
10

Advertisement

Table of Contents
loading

Table of Contents