Technical Spec; Warranty - ferrum HYPSOS User Manual

8. TECHNICAL SPEC

Power Input: Factory configured 110-240Vac/50-60Hz (EU/US Version) or 90-110Vac/50-60Hz (JP Version)
Output Voltage Range: 5-30V
Max Continuous Output Current (for V
Max Continuous Output Current (for V
Maximum Impulse Current: 9A
Maximum Impulse Power: DC V
Max Continuous Output Power (for V
Max Continuous Output Power (for V
Dimensions (without knob, feet and connectors): W217,50 mm x L206,50 mm x H50 mm
Net weight: 2,89 kg
Primary winding fuse (external): 5x20mm - 250V 3.15A, slown-blown for Japan version / 250V 2A, slown-blown for
Europe, US version
Secondary winding fuse (internal): Littelfuse 154004T, 4A
Power consumption: 230V
- Idle - 6VA
- 15W load - 30,7VA
- 60W load - 98VA
- 80W load - 133,9VA

9. WARRANTY

Each individual HYPSOS undergoes comprehensive quality control and a complete test before shipping.
This PSU is warranted by Ferrum to the owner against defects in workmanship and materials used in manufac-
ture for a period of three years from the date of purchase.
If you suspect that your product is faulty, please contact the place of purchase or you contact Ferrum support.
Prior to shipping for warranty services the customer or dealer must obtain an RMA number from Ferrum for
warranty services. Units sent without an RMA number will not be accepted.
Proof of purchase in the form of a bill of sale or received invoice, which is evidence that this product is within the
warranty period, must be presented to obtain warranty service. This warranty is void and inapplicable if the
factory applied Serial Number has been altered or defaced from this product. Faults due to customer misuse,
unauthorized modifications or accidents are not covered by this warranty.
Please pack the product very carefully, preferable in the original packing, to be sure no damage can be done
during shipment.
Ferrum is not responsible for accessories, items left in the packaging and the box in which the device has arrived
for service. Ferrum reserves the right to use a replacement box if necessary.
HYPSOS by Ferrum
below 13,3V): 6A
out
higher than 13,3V): I
out
*9A (270W for 30V)
out
below 13,3V): P
out
higher than 13,3V): 80W
out
, 50Hz 12V out
AC DC
= 80[W] / DC [V]
out out
= V [V] * 6[A]
out out
user's manual 16