Advertisement
※Command List Table
Sending Command to
JIF-2002
R Cr Lf
〈READ〉
Z Cr Lf
〈ZERO〉
T Cr Lf
〈TARE〉
N Cr Lf
〈NET〉
G Cr Lf
〈GROSS〉
※If an invalid character is received？Cr Lf will be sent by the JIF-2002
※If the commands are not accepted for any reason：I Cr Lf will be sent
by the JIF-2002
Sending Command to
JIF-2002
BB Cr Lf
＜BEGIN BATCHING＞
HB Cr Lf
＜HALT BATCHING＞
RF Cr Lf
＜READS FINAL NET＞
S Cr Lf
＜SETPOINT＞
SS ×× Cr Lf
＜SET SETPOINT＞
RS ×× Cr Lf
＜READ SET POINTS＞
SA Cr Lf
＜SET ACCESSORIES＞
RA Cr Lf
＜READ ACCESSORIES＞
CC ×× Cr Lf
＜CODE CHANGE＞
JIF-2002 response
Sending latest data once (Data format
depends on F202)
JIF-2002 display will ZERO. Z Cr Lf will be
sent by JIF-2002.
JIF-2002 will go to NET Mode and display
will TARE. T Cr Lf will be sent by JIF-2002.
JIF-2002 will go to NET Mode. N Cr Lf will
be sent by JIF-2002.
JIF-2002 will go to GROSS Mode. G Cr Lf
will be sent by JIF-2002.
JIF-2002 response
Send back signal "BB"
"BB" an only be received in the Built in
Automatic Program Control Mode
Send back signal "HB"
"HB" an only be received in the Built in
Automatic Program Control Mode
Sending Final NET weight
If B Cr Lf is send by JIF-2002, that means
batching is still in process.
Signal "S Cr Lf" will send back by JIF-2002.
JIF-2002 will send back SET POINT CODE
until totally receive SET POINT CODE data.
SS XX Cr Lf will send back by JIF-2002.
JIF-2002 will send back SET POINT values
until totally receive SET POINT values.
JIF-2002 receives signal "RS xx Cr Lf", and
read xx set point value.
JIF-2002 will send back signal "SA Cr Lf".
JIF-2002 will send back ZERO band data
until totally receive Zero Band Value.
JIF-2002 receives signal "RS xx Cr Lf", and
read xx Zero Band Value.
JIF-2002 will send back signal "CCXX Cr Lf"
and send back ZERO band data (F106＝3)
JIF-2002 WEIGHING INDICATOR&CONTROLLER
61
Advertisement
