camry CR 1183 User Manual page 4

Device Description:
1. Tuning knob / BT 2. Mode button
6. next track button 7. On/Off/Volume knob 8. USB input port
10. Micro USB charging port
Button Functions.
1. Tuning knob /BT - Press: change to Bluetooth mode. Turn Right / Left- Tune frequency in FM mode up and down.
2. Mode button - Short press: Change between FM / Bluetooth / USB / SD / Clock mode.
3. Play / Pause button:
short press- FM: Mute, Bluetooth / USB / SD - Pause start current track. Confirm selection in time setting mode.
Long press- Enter time setting mode, Save and exit time setting mode.
5. Pervious track button: FM: Switch to previous stored Fm station. BT/USB/SD: Previous track. Clock setting: Previous step
6. Next track button: FM: Switch to next stored Fm station. BT/USB/SD: Next track. Clock setting: Next step
7. On/ Off/ Volume knob: Maximum left turn Turn off device. Turn right: Turn on device, increase volume. Turn left: Decrease volume.
Device Functions:
1. Fm Mode.
Short press Mode button (2) until FM mode is selected.
For automatic search and program allotment. Long Press the Play / Pause button (2). The device will start to scan the FM range and assign
all found radio signals to programs.
To choose the previously assigned program press the Next / Previous track buttons (5,6) to switch between the saved stations .
2. Bluetooth mode
Short press Mode Button (2)until Bluetooth mode is selected.
The device will start in pairing mode.
The Bluetooth icon on the display will start blinking/flashing.
Find the „CR 1183 " device on your phone/computed/tablet.
Press pair.
After a „DING" sound the device is now paired. The Bluetooth icon will stay lit during the connection showing it is connected.
The device supports Bluetooth V5.0.
3. AUX mode:
Connect your external device to the CR 1183 by the AUX port.
Short press Mode Button (2)until AUX mode is selected.
Now you can play music from your external device.
All control can be done from the external device.
Only the CR 1183 volume level can be controlled from CR 1183 by the On/Off / volume knob (7)
4. USB mode
Insert a USB Pendrive formatted in FAT32 format into the USB port (4) at the back of the device.
The device should detect the newly inserted USB Pendrive and start playing the first track on the device.
Please take note that CR 1183 supports only MP3/FLAC/Wav format files.
5. SD card mode.
Insert an SD card formatted in FAT32 format into the SD port (5) at the back of the device.
The device should detect the newly inserted SD card and start playing the first track on the device.
Please take note that CR 1183 supports MP3/FLAC/Wav format files..
6. Changing port.
On the displays right upper corner, a battery charge state indicator is shown.
When full it shows the battery state as still not blinking
When low. Also, the device will signal the „Battery Low" signal. And the battery symbol will start to blink.
To charge the device insert a micro USB cable into the charging port (10) connected to a 5V 1A power source to start charging the device.
7. Charging / Pairing indicator
The device has 2 icon colors at the indicator
Blue light flashing shows that the device is pairing
Blue light is stable and lit. The device is connected to another device via Bluetooth.
Red stable light. The device is charging.
Troubleshooting:
Problem: Device is not connecting via Bluetooth, the device is not showing on the list.
Solution: Make sure the CR 1183 is set on Bluetooth mode and is not connected to another device. Please check the back of CR 1183 if the
3.Play/Pause button 4. Display 5. previous track button
9. SD card input port
11.AUX input 12. Charging Indicator / Pairing indicator
4