Reverse The Door - Forno FWCDR6628-24S Instruction

Reverse the door

This appliance is designed with a reversible door feature. You may configure the opening direction the left or from the right as
you like. Please follow the operations below to reverse the door.
NOTE: If desired, please change the door swing prior to installation of the appliance.
CAUTION: To avoid personal injury to yourself and/or damage to property, it is highly recommended that someone assist you
during the door reversal operations.
Removing the door
1. Turn off the unit and disconnect the power plug from the wall outlet.
2. Remove the plastic caps on the left side top of the unit.
(Keep the plastic caps and use for covering holes on the right
side after the door is reversed.
4. Hold the door, loosen the screws and remove the upper hinge. Make sure to hold the door during this step.
5. Lift the door and take it out from the lower hinge and
place it on a padded surface to avoid damage and
scratches.
3. Remove the plastic cap from the upper hinge cover.
6. Unscrew and remove the lower hinge and door pin.
Keep the hinge and pin in accessory bag for future use.
12