Download Print this page

Seametrics DL76 Manual

Download this manual

DL76

Data Logger

PROUDLY

MADE

IN THE

ISO

USA

9001

Need help?

Do you have a question about the DL76 and is the answer not in the manual?

Page 1 DL76 DL76 Data Logger Data Logger PROUDLY MADE IN THE 9001...
Page 2 17+ dataloggers. When a DL76 logger is placed into operation, it is easily set up Note: If ordering a wall mounted DL76 with a mechanical meter, using a laptop computer. Data is also retrieved from the DL76 by select the micropower -04 option.
Page 3 Meter Mounting. Remove the four screws on the meter cover with a 5/32” Allen wrench. After connecting the leads to their respective terminals (see diagram), put the DL76 in place of the meter cover and tighten the screws evenly. The gasket on the DL76 should be visibly compressed by tightening all around.
Page 4 No flow rate EX Magmeter: See if “Status LED” indicator is blinking Broken wire Check for flow rate Seametrics • 19026 72nd Avenue South • Kent, Washington 98032 • USA LT65200312r2.2 20181012 (P) 253.872.0284 • (F) 253.872.0285 • 1.800.975.8153 • seametrics.com 10/12/18...

Dl76w