Download Print this page

Seametrics DL75 Instructions

Data logger system

Advertisement

Quick Links

DL75
DATA LOGGER SYSTEM
inSTRucTiOnS
The Leader in Flow Meter Value

Advertisement

loading
Need help?

Need help?

Do you have a question about the DL75 and is the answer not in the manual?

Questions and answers

Summary of Contents for Seametrics DL75

  • Page 1 DL75 DATA LOGGER SYSTEM inSTRucTiOnS The Leader in Flow Meter Value...
  • Page 2 GEnERAL inFORMATiOn The DL75 is a battery-powered data logger that can be used environmental protection. with any SeaMetrics flowmeter. It stores pulses for weeks or months, depending on the user-set frequency of read- When a DL75 logger is placed into operation, it is easily ing.
  • Page 3 Converting from one The gasket on the DL75 should be visibly compressed by mounting configuration to another requires use of MK10 or tightening all around.
  • Page 4 “Active” light IS blinking Bad cable Replace cable Flow rate incorrect K-factor setting is incorrect Make sure K-factor in DL75 matches flow sensor No flow rate Damaged flow sensor Mechanical: See if rotor spins freely EX Magmeter: See if “Status LED” indicator...

This manual is also suitable for:

Dl75mDl75meDl75w