Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Seametrics DL76
Summary of Contents for Seametrics DL76
- Page 1 DL76 DATA LOGGER SYSTEM INSTRUCTIONS 9 0 0 1 : 2 0 0 8 CERTIFIED COMPANY...
- Page 2 GENERAL INFORMATION The DL76 is a battery-powered data logger that can be used DL76 by means of a laptop and can be analyzed on the laptop with any Seametrics flowmeter. It stores pulses for up to 3 or easily loaded on a desktop computer for analysis.
- Page 3 5/32” Allen wrench. After connecting the leads to their mount for mechanical meters, meter mount for insertion respective terminals (see diagram), put the DL76 in place of magmeters, and wall mount (DL76W). The meter mount the meter cover and tighten the screws evenly. The gasket models match up to any Seametrics lower square housing.
- Page 4 Test cable (tech bulletin “DL75/76: Testing the tive” light IS blinking DC3 Serial Cable” on Downloads page at www.Seametrics.com) K-factor setting is incorrect Make sure K-factor in DL76 matches flow sen- Flow rate incorrect Damaged flow sensor Mechanical: See if rotor spins freely No flow rate EX Magmeter: See if “Status LED”...
Need help?
Do you have a question about the DL76 and is the answer not in the manual?
Questions and answers