Ricoh Pentax K-3 III Operating Manual page 108

Setting the Smart Function
You can register five functions for the Smart Function.
1
Select [Smart Function] in the E2 menu and
press D.
The [Smart Function] screen appears.
2
Select a function number
from [Function 1] to
[Function 5], and press D.
3
Use AB to select the function to assign to each
function number.
The following functions can be assigned.
6
Up to six settings can be registered for a function. The order
of the settings can also be registered.
Unset
*1 *2
User AF
AF Mode
AF Active Area
Hold AF Status
Focus Peaking
AE Metering
*2
*3
E-Dial
ISO Sensitivity
EV Compensation
Flash Exposure Compensation
Program Line
*1 The camera operates with the [AF Mode], [AF Active Area], and
[Hold AF Status] settings made in advance in [AF with Viewfinder].
*2 Press G to make detailed settings.
*3 You can change the ISO sensitivity and exposure compensation
values between the values registered in advance for each
exposure mode by turning V.
4
Press E.
The screen of Step 2 reappears.
Repeat Steps 2 to 4.
5
Press F twice.
106
Smart Function
Specifies the functions that can be used
with Smart Function and the settings
that can be selected.
Function 1
Function 2
Function 3
White Balance
*2
Drive
AA Filter Simulator
*2
HDR Capture
*2
Pixel Shift Resolution
*2
Crop
Custom Image
Shake Reduction
Zoom Review
Grid Guide
Outdoor View Setting
*2
E2 Customizing the Control Panel
You can customize the functions displayed on the control panel.
Some functions in the A, B, and D menus can be saved as
control panel items.
1
Select [Control Panel] in the E5 menu and press
D.
2
Select [Still Image] or [Movie], and press D.
The control panel customization screen appears.
3
Use ABCD to select the
function to change.
4
*2
Press E.
Selectable functions are displayed in the pop-up menu.
*2
5
*2
Use AB to select the
*2
function to save.
*2
Select [--] if you do not want to
*2
save any function.
6
Press E.
The screen of Step 3 reappears.
Press M to reset to the default functions.
7
Press F three times.
t Memo
• When the control panel is displayed from the standby mode,
you can display the screen of Step 3 by pressing J to
customize the control panel.
E5
Select the location of the
item you want to change.
ISO AUTO MAX
6400
Reset Reset OK OK
HDR Capture
-- --
AF Mode
ISO AUTO MAX
6400
Cancel Cancel OK OK