Changing The Settings - Ricoh Pentax K-3 III Operating Manual

Changing the Settings

You can change the settings assigned to the mode dial.
1
Select [Recall User Mode Setting] in the E1
menu and press D.
The [Recall User Mode Setting] screen appears.
2
Select a user mode to
register the saved settings
to from USER1 (O) to
USER5 (5) of the mode
dial, and press D.
3
Select the saved settings from [BOX1] to
[BOX10], and press E.
The selected settings are assigned to the mode dial.
The screen of Step 2 reappears.
t Memo
• If [Recall User Mode Setting] is registered as a function
displayed in the control panel, you can use R to change the
box when the mode dial is set to O to 5. (p.106)
1
2
Recall User Mode Setting
Assign settings saved
in User Mode Box
to Mode Dial.
USER1:
t Memo
USER2:
USER3:
• The settings changed in Step 2 are not saved as the user
• If the settings saved in the box assigned to the mode dial are
Using the User Mode
Set the mode dial to O to 5.
Change the settings as necessary.
The exposure mode can be
temporarily changed in
[Exposure in User Mode] of the
E1 menu.
mode settings. When the camera is turned off or the mode
dial is turned, the user mode settings are reset to the
originally saved ones. The timing to reset the user mode
settings can be set in [User Settings Restoration] in the E1
menu.
When the camera is
Setting
turned off
Type 1 Reset
Type 2 Not reset
Type 3 Reset
changed, the settings applied to the mode dial are also
changed.
Exposure in User Mode
Program AE
Sensitivity Priority AE
Shutter Priority AE
Aperture Priority AE
Shutter & Aperture Prior.
Manual Exposure
Cancel Cancel OK OK
When the mode dial is
turned
Not reset
Reset
Reset
101
6