Advertisement
LK Wall Support Flex Wallbox UNI Push
When two wallboxes are to be installed on a wood-
en stud, then a LK Wall Support Flex Wallbox UNI
Push (Article no. 188 22 03) can be used. LK Wall
Support fixes the wallboxes and provides a flexible
c/c distance between them. LK Wall Support Flex
UNI Push has been adapted for a distance of 300
mm, 450 mm or 600 mm between the
3.1. Cut the wall support to the required length,
see instructions in the table below.
3.2. Fold the upper mounting ear and turn in the
lower mounting ear, see instructions in the table
below.
Instructions
Refers to c/c dimensions
(mm)
1 + 5
600 Wooden stud
1 + 4
450 Wooden stud
2 + 5
450 Steel stud
1 + 3
300 Wooden stud
1
2
= Cutting instructions
= Folding instructions right
= Folding instructions left
6 (8)
Assembly instructions | LK Wallbox UNI Push AX16 V2 and AX20
studs.
3.3. Attach the plate to the side of the stud using
at least two screws in the lower mounting ear and
a least one screw in the upper mounting ear (not
included).
3.4. Mount the box in the bracket and hook this
onto the plate. Adjust the c/c distance between
the boxes.
3
4
EN.29.C.46.20200318
5
Advertisement
