Advertisement
CHANGING LENSES
To Remove the Lens from your Camera:
Grip lens securely in one hand. With the other hand, hold the camera body and press the Lens Lock Release
Button (22). Holding this in, turn the lens counterclockwise until the two Red dots (one on the camera body, and
one on the lens) line up. The lens may now be removed.
Note: When the lens is removed, be sure not to touch the interior of the camera. If the lens will be left off the
camera for any length of time, a Konica Body Cap will protect your camera from dust and dirt.
To Mount the Lens on your Camera:
Line up the Red dot on the lens with the matching dot on the camera body; the lens win "seat" into the body
easily. Now, grip the lens and turn it clockwise gently until it "clicks" into place. No further adjustments are
required!
Loading your KonicaAutoreflex-A3 is exceptionally fast, accurate, and foolproof, because of Konica's Insta-
Grip Load take-up spool...another Konica innovation. Here's how:
1. Press down Camera Back Lock (23), and swing the back open.
2. Slide the film cassette into the Cassette Chamber (25) as shown above.
Advertisement
