Frigidaire FLCE752CAW0 Use & Care Manual page 29

Washer setting chart
These temperatures and water levels are available with the following cycles
Wash Temperature
Hot
Warm
Cold
Water Level
MaxFill
Med
Low
= Available selections.
Wash cycle controls (Start,
Pause, and Cancel)
START
Press WASHER
START|PAUSE button once
to begin the wash cycle.
The unit will emit two short
beeps, the LED will turn solid
white, and the door lid lock
will engage with an audible
double click.
PAUSE
Press WASHER START|PAUSE button
once while the washer is running to pause
the wash cycle. The unit will emit one
short beep, the LED will blink, the wash
tub will come to a complete stop, and the
CONTROLS AND SETTINGS
= Factory presets.
door lid safety lock will disengage with
an audible double click. The wash tub
can take up to 6 minutes to stop after
the START|PAUSE button is pressed. DO
NOT force open the locked lid. Press the
START|PAUSE button again to restart the
wash cycle.
CANCEL
Press WASHER CANCEL button to cancel
the wash cycle. The unit will emit one
long beep, the wash tub will come to a
complete stop, and the door lid safety
lock will disengage with an audible
double click. The wash tub can take up
to 6 minutes to stop after the CANCEL
button is pressed. DO NOT force open
the locked lid.
29