Download Print this page

Troubleshooting - Toshiba CAF-X33XP Owner's Manual

Advertisement

Troubleshooting

This section summarizes the most common problems you could encounter with the
appliance. lf you are unable to solve the problem with the information below,
contact the M idea Consu mer Ca re Center
Problem
Possible solution
The filter replacement code has been displying on the
The appliance does
screen but you have not replaced the corresponding
not work even
filter yet. The appliance will be locked if youkeep using
though it is plugged
the expired filter. In this case, replace the filter and reset
in.
the filter lifetime counter.
The appliance does
The filter replacement code has been on continuously
not work even
but you have not replaced the corresponding filter, and
though it is
the appliance is now locked. In this case, replace the
switched on.
filter and reset the filter lifetime counter.
The appliance
The appliance restarts automatically and goes to the
accidentally powers
previous mode when the power resumes.
off.
The airflow that
comes out of the air
outlet is
The pre-filter is dirty. Clean the pre-filter
significantly weaker
than before.
One of the filters has not been placed in the appliance.
The air quality does
Make sure that all filters are properly installed in the
not improve, even
following order, starting with the innermost filter:
though the
appliance has been
The air quality sensor is wet. The humidity level in your
operating for a long
room is high and causes condensation. Make sure that
time.
the air quality sensor is clean and dry .
Troubleshooting
Problem
Possible solution
The color of the air
quality light always
The air quality sensor is dirty. Clean the air quality sensor
stays the same.
The first few times you use the appliance, it may produce
a plastic smell. This is normal. However, if the appliance
The appliance
produces a burnt smell, contact your Midea dealer or an
produces a strange
authorized Midea service centre. The appliance may also
smell.
produce an unpleasant smell when the filter is dirty. In
this case, clean or replace the filter concerned.
lf the appliance is too loud, you can change the fan
The appliance is
speed to a lower fan speed level. When using the
extra loud.
appliance in a bedroom at night, choose the sleep mode.
m

Hide quick links:

Advertisement

loading