Download Print this page
Elsema G-2025 Manual

Elsema G-2025 Manual

4g receiver with relay output for opening sliding, swing gates, doors or switching devices

Advertisement

Quick Links

G-2025
4G receiver with relay output for opening sliding, swing gates, doors or switching devices
Features
Up to 999 users
4G network compatible
Built-in battery back-up
Setup with easy to use PC software
Switches relay with free call from mobile phone
Digital inputs for sensors or switches
SMS confirmation of relay switching
Secure password protected
Only authorized numbers can operate the G-2025
Operates from anywhere if 4G network is available. Unlimited range!
12 Volts DC power pack included
Application
Open / close gates, doors, shutters, garage doors with a free call!
Security alarm, On/Off lights, pumps and machines.
Description
The G-2025 can have up to 999 authorized users and uses the 4G Telstra and Vodafone network for
communication (Not compatible with Optus). All you need is to insert a valid SIM card and program phone
numbers of all users using the PC software or through simple SMS text commands. When an authorized user
makes a call to the receiver, it rejects the call and activates a relay. Since the call is rejected the user is not
charged for the call.
There are 2 digital inputs available. These 2 inputs can be wired to motion sensor (PIR), smoke detectors, reed
switch, windows, or any other type of voltage free contact. The GSM Receiver can be programmed to send
different SMS messages for each input.
A 12 Volt output is also available on the GSM Receiver which can activate a 12 VDC siren or warning light
when either of the input is activated. (Refer to the wiring diagram)
The G-2025 works on 4G network therefore the receiver can be activated from anywhere in the country where
4G mobile network is available. For example, you can open your gate or switch on your kitchen lights in
Sydney from Melbourne by making a call from your mobile phone.
www.elsema.com
12 Volts DC Power Pack Included
Page 1
ELSEMA
4G Receiver with relay output, G-2025

Advertisement

loading
Need help?

Need help?

Do you have a question about the G-2025 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Elsema G-2025

  • Page 1  Description The G-2025 can have up to 999 authorized users and uses the 4G Telstra and Vodafone network for communication (Not compatible with Optus). All you need is to insert a valid SIM card and program phone numbers of all users using the PC software or through simple SMS text commands. When an authorized user makes a call to the receiver, it rejects the call and activates a relay.
  • Page 2 Wireless equipment might interfere with the 4G network signals of the G-2025 and influence its performance. Avoid using at Petrol / Gas Stations Do not use G-2025 at a petrol / gas station. Power off the GSM Receiver when near fuels or chemicals Avoid using near blasting areas Please follow relevant restrictive regulations.
  • Page 3 ELSEMA 4G Receiver with relay output, G-2025 Setup and Programming Instructions 1. Caller ID must be enabled on all authorized users phone so that the GSM Receiver knows who's calling. 2. Open the back cover of the GSM receiver and insert the SIM card.
  • Page 4: Basic Setting

    ELSEMA 4G Receiver with relay output, G-2025 PC Configuration Software Basic Setting 1. Read Settings: Reads the parameter settings from the GSM receiver to the PC software. 2. Save Settings: Save the basic parameter settings to the GSM receiver. 3. Import profile: Import .xls profile. All settings can be imported from the GSM receiver and copied to other GSM Receivers if used with the same settings.
  • Page 5 ELSEMA 4G Receiver with relay output, G-2025 Authorized Number List 1. Read: Reads the authorized number list from GSM receiver to the PC software. 2. Save: Save the authorized number list to the GSM receiver. 3. Import .xls: Import authorized number list in .xls format from the PC to the configuration software.
  • Page 6 ELSEMA 4G Receiver with relay output, G-2025 Historical Data (Data Log) 1. Read data: Read all historical data from GSM receiver to the PC software. 2. Filter: Select the start and the end “Date” and “Time” of the data which you wish to view 3.
  • Page 7 ELSEMA 4G Receiver with relay output, G-2025 If using SMS commands to setup the GSM receiver: 1. Type the relevant SMS commands in your phone and send it to the GSM receiver controller SIM number. 2. Commands must be in CAPITAL LETTERS. Do not leave any space between the letters or words.
  • Page 8 ELSEMA 4G Receiver with relay output, G-2025  Change the time & date PwdTyymmddhhmm# 1234T yy (year) mm (month) dd (day) hh (hour) mm (minute) E.g If you want to change time & date to 14 June 9am 2018, the SMS command needed is: 1234T1806140900# ...
  • Page 9 ELSEMA 4G Receiver with relay output, G-2025  Delete a user PwdAserial number## E.g A user on position 13 (serial number 13) has to be deleted from the user list, the following SMS command is needed: 1234A013## It is recommended to keep a list of all users and their numbers position.
  • Page 10 ELSEMA 4G Receiver with relay output, G-2025  SMS confirmation of relay switching This feature enables the 1 user and the person making a call to get SMS confirmation of the relay switching ON or OFF. For relay ON you need the following command...
  • Page 11 ELSEMA 4G Receiver with relay output, G-2025 The GSM receiver has 2 digital inputs. When these inputs are activated, it sends SMS messages and make a call to users stored in positions 1-6. The calling feature cannot be disabled. It also switches the Siren output ON.
  • Page 12 ELSEMA 4G Receiver with relay output, G-2025 When inputs 1 & 2 are triggered, it will stay in alarmed status for 1 minute and the siren output switches ON. The Digital inputs 1 & 2 will only trigger an alarm in the following conditions: 1.
  • Page 13: Block Diagram

    ELSEMA 4G Receiver with relay output, G-2025  Reset the Password of the GSM receiver to factory default. Slide the switch near the SIM card to OFF position and disconnect the power. Press and hold the reset button, connect the power and then slide the switch to “ON”. After 6 seconds the Network LED will blink 5-6 times to indicate the password has been reset.
  • Page 14 ELSEMA 4G Receiver with relay output, G-2025 Application GSM receiver 12/24 Volts DC application GSM receiver 240 Volts application Page 14 www.elsema.com...