WaveForm Cel-Fi GO X Manual page 11

05
Positioning & Aiming the Outdoor Antenna
Finding the best location for the outdoor antenna is the most important part of the install.
The Goal
Your aim is to find the best location and direction for the outdoor antenna that maximizes
signal strength and in particular, signal quality, for the frequency bands available in your area.
Set up the GO X as a Signal Meter
If you have a long power extension cable, we
recommend taking the GO X outside with you and
using the 5 ft cable included in the kit to set up the
GO X as "signal meter."
Here are all the parts you'll be using:
POWER EXTENSION
CABLE
GO X and
5 ft Jumper
Power Supply
Pigtail
Connect pigtail to
the port on the
Outdoor antenna
GO X
Don't have a long power extension cable? Keep the GO X indoors near a power socket, and
use the 30 ft coax cable included in the kit to take the outdoor antenna outside. Everything
will be the same as the diagram above, except you'll use the 30 ft coax cable instead of the 5
ft jumper.
Finding the best outdoor antenna location without a power extension cable is a little bit
harder. You won't easily be able to stay connected to the GO X via Bluetooth as you try
different locations. You may need a second person standing near the booster, watching the
Wave app to help you as you take signal readings.
10