Advertisement
Set Up the Valve and Actuator
4
(Skip to step 5 if your install does not include water shut-off)
1 -
Install the CR123A (3V) batteries with positive side "in" and negative side "out,"
facing you.
2 -
Install the stem and adaptor as shown, using
the provided screws.
3 -
Install the valve into the water line after the
manual shut-off; after any fire suppression systems;
and according to all local plumbing codes.
4 -
Record the actuator name, location and photo
in the app.
5 -
Turn on the water supply. Check for leaks.
6 -
Hang the emergency key and tag on the
actuator lock (G).
NOTE: Be sure to turn off the water
supply before installation.
NOTE: Valves can be installed in any
direction or orientation.*
A.
Shut-off valve motor
B.
Motor stem position indicator
C.
LED status light
D.
Multipurpose button
E.
Battery housing cover
F.
Mounting adapter
G.
Lock
H.
Short mounting adaptor and stem
(for actuator install perpendicular to pipe)
I.
Long mounting adaptor and stem
(for actuator install parallel to pipe)
J.
Emergency turn key
K.
Valve
Manual/Emergency Operation
For information on how to manually open and close the valve, please refer to the included tag.
NEED INSTALLATION OR SETUP ASSISTANCE?
Or visit www.RelianceDetection.com/support/RSC-900
Call toll-free: 888-771-4929
2
* Please visit our website for detailed video
instructions for hardware component set up:
www.RelianceDetection.com/support/RSC-900
B
C
A
G
H
I
1
+
–
D
E
F
J
K
Advertisement
