Advertisement
Download the RSC-900 System Management App
1
Download the "RSC-900 by RDT" app onto the designated smartphone from the
Apple App Store or Google Play.
Set Up the Communication Hub
2
FOR WI-FI HUB SYSTEMS:
confirm that your mobile phone is connected to the same before proceeding. From the phone settings,
select the system hub from the list to join it to the network. Follow the prompts on the app to complete
system set up. Reference steps 4 –8 for hardware installation, set-up confirmation and system testing.
FOR ETHERNET HUB SYSTEMS:
2 -
Install batteries
A.
LED status light
B.
Upper cover
C.
Lower cover
D.
Power / Ethernet inputs
(bottom of lower cover)
E.
Table stand (detachable –
Ethernet hub only)
DO NOT
proceed to next step until the LED on top of the Hub is flashing green (Internet communication has
been established). Check the Internet firewall settings on your router or consult your Internet provider if you
see a blue LED on the Hub.
Set Up Account & System
3
1 -
Once Internet communication has been
established with the hub (as indicated by flashing
green LED status light) create a New Account and
System in the app.
IMPORTANT!
Visit our website for detailed video
instructions for account and system set up:
www.RelianceDetection.com/support/RSC-900
Component Indicator Light Guide
Green .......................... OK
Blue ............................ Communication problem
Slow Red Flash ............ Low battery
Quick Red Flash ........... Water leak detected (sensor only)
You will be registering the RSC-900 to your designated Wi-Fi network;
1 -
Connect Ethernet cable to 2.4 GHz band Internet router
3 -
Plug into wall outlet
A
B
C
D
E
2 -
account has been
set up on the app,
scan the Kit Master
QR Code found
on the outside
of the master kit box (see above) to add the
basic kit components to your system. Wait until
"Installation Successful" appears on the app and
then tap "OK."
Flat Surface Install
Wall Mount Install
(screws not included)
After your
Advertisement
