Madeira Agestis Manual page 53

1
Switch off the circuit breaker
of the installation site.
4
Install the ceiling bracket with
the screw kit. Make sure the
ceiling bracket is securely fas-
tened.
7
Rotate the fan unit 2 until the
rotation latch engages.
10
Connect the cable clip of the
fan unit 2 with the clip on the
luminaire 4 and install the lu-
minaire 4 to the fan unit 2 us-
ing its three screws.
13
Switch on the circuit breaker
of the installation site.
2
Remove the right screw of the
ceiling bracket screws 5 on
both sides.
5
Connect the cable to the termi-
nal as follows:
L Brown
N Blue
Yellow/Green
8
Install the five blade holders 6
to the motor of the fan unit 2
by use of two screws per blade
holder.
11
Fit the three lamps (max.
50 W) to the sockets of the lu-
minaire 4.
ENGLISH
3
At the installation site, drill two
8 mm holes into the ceiling and
insert the wall anchors (not in-
cluded).
6
Connect the cable clips of the
ceiling bracket with the clips
of the fan unit 2. Install the
cover 1 by attaching it to the
ceiling bracket.
9
Install the five blades 3 to the
motor of the blade holders 6 by
use of three screws per blade.
12
Install the two pull chains at
the speed and light switch of
the fan unit 2.
GB
53