Cleaning And Maintenance - TECHWOOD TNV-101 Instruction Manual

(Do not add cleaning solution, only use tap water, or distilled/purified water.)
● Unroll the power cord completely.
● Check that the tension in force in the country where you are, corresponds to
that indicated on the apparatus.
● Connect the apparatus in a correct socket-outlet, (and connected to the
ground if the unit is Class I), to avoid any danger.
● Disconnect the power source cable before any operation of cleaning of
maintenance and accessories assembly.
● Never modify the appliance in anyway.
Turn on the power switch, power indicator Light, the unit starts heating.
NOTE : It takes approximately 30 seconds for the unit to heat up and the steam to
be ready.
Push the unit along the floor, Forward and backward.
When the water level in the water tank is low, Turn off the power switch
immediately.
Unplug the unit from the electrical outlet and refill the water tank following the
Instructions.
NOTE : If you use steam mop for a long time, the cloth sleeve may become very
wet or dirty & will need to be replaced.
Turn off the unit & allow to cool before replacing.
NOTE : While replacing cloth sleeve don't touch steam head to avoid scalding.
To sanitize a specific area of your floor, position the steam mop over the area for
a minimum of 8 seconds, but no longer than 15 seconds.
NOTE : The steam temperature will reach approximately 90-110°C. This is
particularly useful for cleaning bathroom, shower, pet sleeping area or around
garbage bins.
Before cleaning, always: switch off the appliance, disconnect the apparatus and
let it cool.
Clean the outside of the apparatus with a sponge or slightly wet linen.
The parts (removable) can be washed in hot water with sponge and soft
detergent.
Never plunge the apparatus in water or all other liquid!
Do not use abrasive cleaners, gritting, or metal brush or another cutting object.
-Ensure the unit is completely cool and dry.
USE

CLEANING AND MAINTENANCE

STORAGE
15