Table of Contents
Advertisement
No elbow grease
Easily removes dirt and grime from hard floors or carpets, leaving them
hygienically clean without the need for hard physical labour.
Tap water only
Designed for use with plain tap water that is converted into steam. (Distilled or
purified water is recommended for use, ONLY in hard water areas.)
Reusable cloths
Comes with two re-usable, highly absorbent microfiber cloths that can be
machine-washed in hot water and tumble dried.
Use on most hard floors
Designed for use on hard surfaces that will withstand high heat, including ceramic
tiles, marble, stone or linoleum floors and on sealed hardwood or parquetry floor
(However, see cautions below).
Use on carpet and rugs
Designed for use with the supplied carpet glider on carpet and rugs that will
withstand high heat.
Do not use the steam mop on unsealed wood floors.
Do not let the steam mop stand on any wood floor for an extended period of
time.
Note : This could cause the wood grain to expand.
Test an isolated area of the surface to be cleaned before proceeding.
Take extra care when using the steam mop on surfaces that have been treated
with wax, as the heat and steam may remove the wax or the sheen.
Take extra care when using the steam mop on vinyl, linoleum or any other
heat-sensitive floors, as too much heat can melt the glue on the floor.
We recommend cleaning a small sample first in an inconspicuous area of the
floor and checking the floor
surface to ensure suitability for steam cleaning.
Before you start steam cleaning your floors, make sure:
1. The surfaces to be steam cleaned have been swept or vacuumed.
2. The steam mop is fully assembled (see Assembling paragraph).
3. The microfiber cloth sits tightly around the steam head.
(Do not use the mop without the microfiber cloth!)
4. The water tank is filled.
m anufacturer's use and care instructions for the
14
Advertisement
Table of Contents
