Table of Contents
Advertisement
Fill with water:
Push on the two button on each side of the tank. Tank will get out,
Open the tank cap & fill with water,
Close the water tank with the cap and put the tank back into the body.
1.
Press handle tube button to remove the handle from main body.
2.
Install the accessory adaptor on the main body, until it is into place.
3.
Choose the appropriate accessories (check accessories use list), according
to arrow indicator to align and implant to accessory adaptor, then turn
anticlockwise, until it into place.
NOTE : to remove accessory adaptor, Press salient point on the accessory
adaptor.
TO USE AS A HAND STEAM CLEANER
11
Advertisement
Table of Contents
