TECHWOOD TCR-4206 Instruction Manual page 9

Electric rice cooker
Table of Contents

Advertisement

● Check that the tension in force in the country where you are, corresponds to
that indicated on the apparatus.
● Connect the apparatus in a correct socket-outlet, (and connected to the ground
if the unit is Class I), to avoid any danger.
● Disconnect the power cable from the mains before any maintenance cleaning
and fitting of accessories.
● Always place the appliance on a horizontal table or flat surface.
● Never modify the device.
● Set the ON / OFF button (​ 1 A​ ) on " I " position.
The pilot light will light up.
● At the end of cooking, the cooker will
automatically move to "Keep Warm" function.
Notes : Always place the inner container in the cooker before use.
The cooker will only work if the internal container is correctly in place.
Always set the "On / Off" switch to Off after use Otherwise, the cooker will
be powered. (if it stays connected).
Always place the lid on the appliance during cooking.
● Leave the lid in place after serving to prevent the rice from drying out.
● To reheat cold rice, add cold water, a quarter of the measure per measure of
rice, stir, then place the button on "Cooking". After a few minutes, set the
selector to "Keep warm" or switch off the appliance.
Note : For easy use, the internal container is graduated to put the adequate
amount
of water. A measuring cup is provided.
Using the measuring cup provided, measure and place the rice in the internal
container. (One full measurement equals one cup).
Examples of how much water to add to the container.
Raw Rice
2 cups
4 cups
6 cups
8 cups
10 cups
12 cups
​ W ater
2 - 2½ cups
4 - 4½ cups
6 - 6½ cups
8 - 8½ cups
10 - 10½ cups
12 - 12½ cups
9

Advertisement

Table of Contents
loading

Table of Contents