Table of Contents
Advertisement
1. Connect the tube to the vacuum cleaner
2. Install as desired:
a. the electric rotary brush by inserting it with
precaution in the other extremity of the tube.
Note: It is possible to connect the rotating brush directly to the device.
b. Install the 3 in 1 accessory (to vacuum furniture, pillow, recesses etc.)
by inserting it carefully Or into the tube, either directly on the suction
connection of the device.
Press the on / off switch for 2 seconds to start the vacuum cleaner.
The indicator lights come on.
Press the speed controller, on the back of the unit, to switch to slow or fast speed.
Note: During use, the battery discharges, the 3 charge indicator lights go out one
by one.
When the battery is discharged, the last indicator light flashes for 30 to
40
seconds and the machine stops operating.
• Always unplug the power cable from the power supply before performing any
maintenance cleaning and accessory fitting.
• Never modify the device.
Before use
USE
8
Advertisement
Table of Contents
