Table of Contents
Advertisement
Fig. 1
Back of the support (1)
Insert the tip of the adapter (2)
in the hole of the loading base.
Fig. 2
Flip the support (1)
to present it Front face (2)
Secure the base to the wall with two screws (supplied) (3).
• Unwind the mains lead of the adapter completely.
• Check that the voltage in the country where you are,
corresponds to the voltage indicated on the device.
Plug the adapter into a wall outlet.
Place the vacuum cleaner in the charging base (Fig. 3).
Note: The blue light begins flashing to indicate that the unit is
charging.
After 4-5 hours, all lights will be on.
Notes: This means that the battery is fully charged.
Charge the device at least 5 hours both first time to preserve
the longevity of the battery.
If the vacuum cleaner is not used for a long time, it is still
advisable to charge the battery at less once every 6 months.
Press the button above the charging base (1)
to release the unit and start using it.
WALL MOUNTING and CHARGING
7
Advertisement
Table of Contents
