Advertisement
SPECIFIC SAFETY REQUIRED FOR THIS PRODUCT
1. Use the fan always set it on a flat surface.
2. Do not carry the device by holding the power cord.
3. Do not insert objects through the protective grill.
4. Do not use the device in a bathroom
5. Always use the fan with the included foot and upright.
6. Do not use near curtains etc.
No warranty will be applied if the appliance is used for other
than its intended use.
1. Front Grid
2. Closing clips
3. Fan Blade
4. Screws to secure the grid
5. Rear grid fixing screws
6. Rear Grid
7. Carrying handle
8. Axis of the motor, blades support
9. Speed selector
BLADE & PROTECTION GRID ASSEMBLY METHOD
1. Secure the rear grid on the motor with the four foreseen screws.
2. Install the propeller blades on the motor shaft and screw the blade clamping
nut.
TO KNOW IT'S UNIT
10. Power Button On / Off for waving
11. Engine cover
12. Fan Base
13 to 17. Detail of mounting between the
engine and the base.
8
Advertisement
