Cleaning And Maintenance - TECHWOOD TBLC-951 Instruction Manual

2. Reheating
Previously prepared soup that has gone cold can be reheated in the soup maker.
Set the timer time according to your wish.
3. Blending
The heated Blender is also a traditional Blender.
Just assemble the device, add the ingredients and mix.
Notes : It is important that the ingredients reach the minimum level in the bowl, but
does not exceed the maximum level.
It is impossible to grind the dry ingredients. The sensor will not accept it.
Before cleaning, Always : switch off the appliance, disconnect the apparatus and
let it cool.
Clean the outside of the apparatus with a sponge or slightly wet linen.
The parts (removable) in contact with food like plate, bowl, forks, Spatula etc. can
be washed in hot water with sponge and soft detergent or put in the dishwasher
(except elements with connector).
Never plunge the apparatus in water or all other liquid !
Do not use abrasive cleaners, gritting, or metal brush or another cutting object.
Do not clean the soup maker in dish washer.
Always disconnect the soup maker before cleaning.
Do not immerse the soup maker in water or any liquids.
Rinse the lid in warm, soupy water.
To clean the inside of the jug, rinse to remove any soup or large food particles.
Remove any food remains using a soft cloth and mild detergent before rinsing
again.
Caution: the blades in the jug are very sharp and removable, extreme caution
shall be taken when cleaning the inside of the jug.
Pour 800ml of water, press the blending button to clean the jug, release the button
to stop the process.
Change the water and start again if necessary.

CLEANING AND MAINTENANCE

Tip for Cleaning the jug.
10