Advertisement
Operating Manual
KE8000
Optical power meter
Version 1.3
© KURTH ELECTRONIC GmbH
All rights reserved, including translations.
All reprints and electronic copies, including excerpts, require prior written approval
of Kurth Electronic GmbH.
All of the brand names and trademarks cited herein are the property of their registered owners.
Kurth Electronic GmbH | Muehleweg 11 | D 72800 Eningen u.A. GERMANY |
Tel. +49(0)7121 9755 0 | Fax +49(0)7121 9755 56 |
info@kurthelectronic.de | www.kurthelectronic.de
Advertisement
Table of Contents
Related Manuals for Kurth Electronic KE8000
Summary of Contents for Kurth Electronic KE8000
- Page 1 Kurth Electronic GmbH. All of the brand names and trademarks cited herein are the property of their registered owners. Kurth Electronic GmbH | Muehleweg 11 | D 72800 Eningen u.A. GERMANY | Tel. +49(0)7121 9755 0 | Fax +49(0)7121 9755 56 |...
- Page 2 The laser could injure your eyes, never look directly at the laser out- put or the connected optical fibre. Do not install fibres while the light source is active and make sure that your eyes are protected at all times. © Kurth Electronic GmbH, All Rights Reserved...
- Page 3 The KE8000 is used to determine the optical power in the range of 800 to 1700 nm wavelength and displays measured values in µW / dB or dBm. It has six calibrated wavelengths (850 nm, 1300 nm, 1310 nm, 1490 nm, 1550 nm, 1625 nm) and can perform both absolute and relative power measurements.
- Page 4 Press the �� button to turn the LCD backlight on / off (auto-off on / off see position 1). 6. Battery charge status When the inserted batteries reach the lower state of charge, the battery indi- cator changes to . © Kurth Electronic GmbH, All Rights Reserved...
- Page 5 KE8000 www.kurthelectronic.de www.kurthelectronic.de Connect the KE8000 level meter directly or via an optical measuring cable to your test object. For system power level measurements, the absolute power level is measu- red in dBm. System power levels can, for example, be measured directly at the transmitter output Tx of an optical transmission system.
- Page 6 KE8100 or KE8200. Measuring step 1 – Reference measurement Connect the light source and the level meter KE8000 with a high-quality optical measuring cable. The power meter now displays a measu- red value in dBm, which corresponds to...
- Page 7 Power supply and running time Power supply 2 x AA alkaline batteries Running time > 70 hours with auto-off function Environmental condition Operation temperature 0 – +50°C Storing temperature -20 – +60°C Humidity up to 93%, non-condensing © Kurth Electronic GmbH, All Rights Reserved...
- Page 8 „ The device is protected from splash water and dust by the front foil. However, it is not waterproof. Last revision: 09 / 2018 © Kurth Electronic GmbH, All Rights Reserved...
Need help?
Do you have a question about the KE8000 and is the answer not in the manual?
Questions and answers