Table of Contents
Advertisement
Problem: Image is reversed.
Select "Image" from the OSD and adjust the projection direction.
See page 22, 23.
Problem: Lamp burns out or makes a popping sound
When the lamp reaches its end of life, it will burn out and may
make a loud popping sound. If this happens, the projector will
not turn on until the lamp module has been replaced. To replace
the lamp, follow the procedures in the "Replacing the Lamp". See
page 36.
Problem: LED lighting message
Message
Standby State
(Input power cord)
Lamp lighting
Power on
Power off (Cooling)
Error (Lamp fail)
Error (Thermal fail)
Error (Fan lock fail)
Error (Over Temp.)
Error (Lamp Breakdown)
=>Light On
Appendices
Power LED
Temp LED
Amber
Slow Flashing
Quick Flashing
Flashing
Flashing
Quick Flashing
Flashing
=>Light Off
Lamp LED
... English
Advertisement
Table of Contents
