Lamp Hour Reset
button after choosing "Yes "to turn the lamp hour
counter to 0 hours.
to start "Security" setting. If the "Security" function is
enabled, you must enter "Administrator Password" first before
This projector provides an excellent security function
for the administrator to manage the usage of the projec-
Select "On" to enable the security function. User have
to enter password depending on the "Security Mode"
defined while setting "User Password". Please refer
to "User Password" section for details.
Select "Off" then user can switch on the projector
without password request.
Once the security function is enabled, the projector
will request user to enter password when switch on
the projector. Both "User Password" and "Adminis-
trator Password" can be accepted for this dialogue.
(Computer / Video