Acer PD311 series User Manual page 27

Xga/svga single chip 0.55” dlp projector
Hide thumbs Also See for PD311 series:
Table of Contents

Advertisement

1. If the projector was turned on, press power button twice to turn
off the projector.
2. Unplug the AC power cord from the projector.
3. Press and hold "Menu" and "
plug the AC power cord to the projector.
4. When Temp and Lamp LEDs are turned light, release both but-
tons, projector enters download mode.
5. Please make sure the USB cable has been connected to the pro-
jector from your PC.
Lamp Hour Elapse
Displays the lamp's elapsed operating time (in hours).
Lamp Reminding
Choose this function to show or to hide warning message when
the changing lamp message is displayed. The message will show
up 30 hours before end of life.
User Controls
Management
(Computer / Video
Mode)
Acer eOpening Management is a PC utility
for user to change the default startup screen
of Acer projector to their desired image. You
can install Acer eOpening Management from
the bundled CD. Connect the projector to
your PC with the bundled USB cable then
execute Acer eOpening Management utility to
download your desired image from your PC
to projector. Before the download starts, the
projector must enter "Download Mode" first.
Please follow the instruction below to enter
"Download Mode".
" buttons simultaneously then
25
... English

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pd323 series

Table of Contents