Related Manuals for Loewe 2 T-CI
Summary of Contents for Loewe 2 T-CI
- Page 1 Operating instructions. Digital TV retrofit kit 2 T-CI Accessories. 31789_001 DVB_T_V3_GB 13.11.2003, 15:27 Uhr...
-
Page 2: Table Of Contents
Contents Welcome Manufactured under license from Dolby General information Laboratories. „Dolby“ and the double-D symbol Connecting antenna are trademarks of Dolby Laboratories. Confidential unpublished works. © 1992-1997 Determining antenna position/aligning Dolby Laboratories. All rights reserved. the antenna Connections on rear of unit Digital audio output Initial start-up Preparing for initial installation... -
Page 3: Welcome
This reception module also allows reception of digitally broadcast radio stations if this feature The digital TV upgrade kit 2 T-CI is offered by the station providers. offers you the following advantages: • All terrestrially received digital and analog... -
Page 4: Connecting Antenna
Connecting antenna Determining antenna 5. For digital programs select Connect the antenna cable from the roof ”Range – DVB-T”. antenna to the antenna socket ”VHF/UHF IN” position and aligning the 6. Enter the appropriate channel number with on the back of your TV set to receive digitally the numeric buttons. -
Page 5: Connections On Rear Of Unit
Connections on rear of unit Signal Box Spheros 42 HD COM DIGITAL TV AUDIO IN 3 Antenna socket UHF/VHF 120-240V~ terrestrial (DVB-T) 50/60 Hz COMPONENT AUDIO AUDIO DIGITAL IN 1 AV 3 AV 1 AV 2 (RGB/YUV) (RGB) RC5/ AUDIO IN 2 PIP UHF/VHF DISPLAY... - Page 6 Connections on rear of unit Articos 55 Slots for Common Interface modules Digital sound output 1 DIG OUT CRTL DIGITAL-TV VHF/UHF COMPONENT AUDIO IN 3 DIGITAL AUDIO IN 1 AUDIO VHF/UHF SYSTEM AUDIO SERVICE RC5/ AV 2 AV 1 IN 2 AV 3 (RGB) (RGB/YUV)
-
Page 7: Initial Start-Up
• If your TV has been upgraded later with the Please define the scope of channels to search for: The station search may take some time. ”Digital-TV upgrade kit 2 T-CI” we Do not make any entries or switch off recommend you to perform the ”Programs... -
Page 8: Inserting The Common-Interface Module
This requires a program search for all already the case, you have to insert it. You new receivable programs. will find the slots on the back of your Loewe- TV-set or on the front of the signal box (in Spheros 42 HD). -
Page 9: Digital Radio Stations Search And Store
Initial start-up Digital radio stations You can search for channels or frequencies. Follow the wizard. search and store 5. Finally enter from which program place the found stations are to be stored. Your receiver can receive and play radio 6. Press the OK button. programs in high quality as well as TV You now get a summary of the settings you programs. -
Page 10: Daily Handling
Daily handling Changing stations with In the bottom line you can see the name of the Channel overview: TV Bouquets FRANCE 5 1 CANAL+ program. Further display options which can be the station table EUROSPRT selected in ”TV menu – Settings – On-screen displays”... -
Page 11: Dvb Subtitles
It is preferable to use the record function (red Note: button) in the EPG. This menu is only available with digital programs. Detailed instructions for handling video recorders can be found in your VCR or Loewe TV operating manual. 31789_001 DVB_T_V3_GB 13.11.2003, 15:27 Uhr... -
Page 12: What To Do When
What to do when... Malfunctions, their causes and remedies Problem Possible cause and remedy No reception with active antenna Activate the supply voltage, see page 4 chapter ”Connecting antennae”. Picture and sound interference (block Optimize the position or alignment of the reception antenna, see page 4. formation) Message ”No signal”... - Page 13 Important data are being stored. This may take a few seconds. Please do not switch the set off during this time. Loewe Hotline If you are still unable to resolve the problem, please contact your dealer or the Loewe Hotline: Telephone: +49-(0)1801 222 563 93 Fax: +49-(0)9261 99 500 Internet: www.loewe.de E-mail: www.loewe.de (contact section)
-
Page 14: Index
Index CI module (Common Interface) A CI module is a decoder module for digital TV Electronic Program Guide: your TV“s electronic and radio programs according to the CI program guide standard. Smartcard To show the coded programs a released A released Smartcard from the appropriate Smartcard of the program provider is required program provider is necessary for decoding in addition to a CI module.
Need help?
Do you have a question about the 2 T-CI and is the answer not in the manual?
Questions and answers